How to Retrofit High Pressure Sodium Lights With Led?

If your business or municipality is looking to save on energy costs, you may be considering retrofitting your high pressure sodium (HPS) lights with LED bulbs.

Checkout this video:

1.What is a high pressure sodium light?

A high pressure sodium light is a type of gas-discharge lamp. They are used in street lights and flood lights because they are very efficient at producing light. While they are very efficient, they do have some drawbacks. One of the drawbacks is that they produce a lot of heat. This can be a problem in areas where there is not a lot of ventilation. Another drawback is that they tend to produce a lot of glare. This can be a problem for people who are trying to read signs or books under these lights.

## 2.What are the benefits of retrofitting high pressure sodium lights with LED?

LEDs have many benefits over traditional light sources. They are more energy efficient, they last longer, they generate less heat, and they produce less glare.

2.What are the benefits of LED lights?

LED light bulbs use much less energy than incandescent or halogen bulbs, and they last a lot longer too. In fact, LED bulbs can last up to 50,000 hours, which is around 50 times longer than an incandescent bulb. This means that you’ll save money on energy costs and replacement bulbs.

LEDs also emit very little heat, so they’re much cooler than traditional light bulbs. This makes them safer to use and touch, and it extends the lifespan of the bulb even further.

3.Why retrofit high pressure sodium lights with LED?

There are many reasons why you might want to retrofit high pressure sodium lights with LED. One of the most common reasons is to improve energy efficiency. LED lights use less energy than traditional incandescent bulbs, so retrofitting your high pressure sodium lights with LED can help reduce your energy bill.

Another reason to retrofit high pressure sodium lights with LED is to improve light quality. LED lights produce a brighter, whiter light than traditional incandescent bulbs, so they can help improve visibility and make it easier to see at night.

Finally, retrofitting high pressure sodium lights with LED can also help improve safety. LED lights are less likely to shatter than traditional incandescent bulbs, so they can help reduce the risk of injury if a bulb breaks.

4.What are the steps to retrofit high pressure sodium lights with LED?

1. Unscrew the housing unit and remove the glass globe.
2. Cut or strip the wires that connect the HPS ballast to the socket.
3. Remove the HPS ballast unit from the housing.
4. Insert an LED retrofit kit into the housing and screw it in place.
5. Reconnect the wires to the socket, screwing them in place tight.
6. Replace the glass globe and screw on the housing unit.

5.What are the benefits of retrofitting high pressure sodium lights with LED?

There are many benefits to retrofitting your high pressure sodium lights with LED. Some of these benefits include:

– improved light quality
– longer lifespan
– lower energy consumption
– reduced maintenance costs

6.What are the challenges of retrofitting high pressure sodium lights with LED?

While there are many benefits to retrofitting high pressure sodium lights with LED, there are also some challenges that should be considered. One of the biggest challenges is the initial cost of LED bulbs. LED bulbs are typically more expensive than traditional incandescent or fluorescent bulbs, but they last much longer and use less energy, so they can save money in the long run.

Another challenge is that LED bulbs produce a different light than high pressure sodium lights. This can be a problem if the retrofit is being done in an area where light levels are critical, such as in a hospital or factory. It can also be an issue for people who are sensitive to light, such as those with migraines or Photosensitive epilepsy. In these cases, it is important to make sure that the LEDs will not make the environment too bright or too harsh before retrofitting.

Finally, some high pressure sodium lights are more difficult to retrofit than others. Lights that are in hard-to-reach places or that have special mounts may need to be replaced rather than retrofitted. Consulting with a professional before starting a retrofit project can help avoid these challenges and ensure a successful outcome.

7.How can you overcome the challenges of retrofitting high pressure sodium lights with LED?

One of the main challenges when retrofitting high pressure sodium lights with LED is getting the LED light to evenly distribute throughout the fixture. This is especially difficult with older high pressure sodium lights, which tend to have a more yellow light. To overcome this challenge, you can use a diffuser or lens to help distribute the light more evenly.

8.What are the best practices for retrofitting high pressure sodium lights with LED?

When retrofitting high pressure sodium lights with LED, there are a few best practices to keep in mind. First, it is important to choose an LED product that is specifically designed for retrofitting high pressure sodium lights. This will ensure that the LED product will fit properly and work effectively with your existing fixture. Secondly, it is important to choose an LED product that has a high color rendering index (CRI). This will ensure that the colors of your retrofitted fixture will be accurately represented. Finally, it is important to choose an LED product that has a long lifespan. This will help to ensure that your retrofitted fixture will last for many years to come.

9.Are there any other considerations for retrofitting high pressure sodium lights with LED?

When retrofitting high pressure sodium lights with LED, it is important to consider the following:
-The existing sodium ballast must be removed.
-A new LED driver must be installed.
-The existing reflector may need to be replaced.
-The existing lens may need to be replaced.

10.What are the next steps for retrofitting high pressure sodium lights with LED?

1. Determine whether your high pressure sodium lights are eligible for rebates or other incentives.

2. Work with a lighting consultant or electrician to determine the feasibility of retrofitting your high pressure sodium lights with LEDs.

3. Identify potential suppliers of LED retrofit kits or bulbs that are compatible with your high pressure sodium lights.

4. Obtain price quotes from each supplier and compare the costs of the different options.

5. Make a decision on which supplier to use and purchase the necessary retrofit kit or bulbs.

6. Install the retrofit kit or bulbs in your high pressure sodium lights according to the instructions provided by the supplier.

Scroll to Top