If you’re looking to replace the led dash lights on your Honda Ridgeline, you’ve come to the right place. In this blog post, we’ll show you how to do it quickly and easily.
Checkout this video:
In this guide, we will show you how to replace the led dash lights on a Honda Ridgeline. This is a relatively easy task that anyone can do in about 30 minutes. You will need a few tools to complete this task, but nothing too difficult to find or use. Let’s get started!
Tools and Materials Needed
In order to replace your led dash lights, you will need the following tools and materials:
-A Phillips head screwdriver
-A flathead screwdriver
-A LED replacement bulb (the same size as your old one)
First, use the Phillips head screwdriver to remove the two screws that hold the lens cover in place. Next, use the flathead screwdriver to pry the lens cover off of thedashboard. Once the cover is removed, you should be able to see the back of the LED bulb.
Use a Phillips head screwdriver to remove the two screws that hold the LED in place. Be careful not to drop or damage the bulb when removing it. Next, take your new LED replacement bulb and insert it into the socket, making sure that it is facing the correct direction. Finally, put everything back together in reverse order.
If one or more of the led dash lights on your Honda Ridgeline have stopped working, you may be able to replace them yourself. This guide will show you how.
Before you begin, make sure you have the following materials:
-A Phillips head screwdriver
-A flat head screwdriver
-Needle nose pliers
-A replacement led dash light (or two, if more than one is out)
First, use the Phillips head screwdriver to remove the two screws that hold the panel containing the led dash lights in place. Once the screws are removed, carefully pull the panel away from the dashboard. If it is stuck, use the flat head screwdriver to help pry it loose.
Next, use the needle nose pliers to gently remove the defective led dash light from its socket. Be careful not to damage the surrounding wires or plastic. Once the old light is out, insert the new one and gently push it into place until it clicks. Repeat this process for each defective led dash light.
Finally, reattach the panel and screws, making sure everything is snug and secure. You’re now ready to hit the road with your newly repaired Honda Ridgeline!
Tips and Tricks
One of the first things you notice when you get in your car is the lighting. The Honda Ridgeline has a very unique and stylish look, and one of the things that make it stand out are the LED dash lights. These LED dash lights not only look cool, but they also last a lot longer than traditional incandescent bulbs.
However, like all things, they eventually burn out and will need to be replaced. Replacing your LED dash lights is actually very simple and can be done in just a few minutes. Here are some tips and tricks to help you replace your LED dash lights:
-To start, you will need to open up your glove box and remove the fuse cover. Inside the fuse cover, there is a diagram that shows you which fuse corresponds to the LED dash lights. Once you have found the correct fuse, simply remove it and replace it with a new one.
-Next, you will need to locate the LED dash light assembly. This is usually located on the center console near the shifter. Once you have found it, simply twist it counterclockwise to remove it.
-Now, take your new LED dash light and insert it into the assembly. Be sure that the positive ( + ) side is facing up. Once it is in place, simply twist it clockwise to lock it into place.
-Finally, replace the fuse cover and close up your glove box. That’s it! You’ve successfully replaced your LED dash light.
Now that you know how to replace the led dash lights on your Honda Ridgeline, you can put your knowledge to good use. Be sure to keep a few replacement bulbs on hand so that you can change them out as needed. With a little bit of care, you can keep your Honda Ridgeline looking great for years to come.