How to Repair Led Strip Lights on Your Sony Bravia TV

How to Repair Led Strip Lights on Your Sony Bravia TV. We’ll show you how to fix common issues and get the most out of your Sony TV.

Checkout this video:

Check the power source

If your TV is not turning on, or if the led lights on your TV are flashing or flickering, the first thing you should do is check the power source. Make sure that the power cord is plugged in to a wall outlet and that the other end is properly connected to your TV. If you are using a power strip, make sure that it is turned on and that the outlet it is plugged into is working. If you are still having trouble, try plugging the TV into a different outlet.

Check the LED strips

If your Sony Bravia TV has LED strips that are not working, you may be able to repair them by checking the LED strips themselves. Start by unplugging your TV and removing the back panel. Locate the LED strips and check to see if they are loose or damaged. If they are, you can try to tighten or replace them. If this does not work, you may need to replace the entire back panel.

Check the controller

Before you start taking your TV apart, it’s important to check the controller. A lot of times, the controller is the root of the problem, not the TV itself. If the controller is defective, it might be sending out incorrect signals that are causing the led strip lights to malfunction. To check the controller, simply unplug it from the TV and plug it back in again. If that doesn’t fix the problem, then you can move on to other potential solutions.

Check the power supply

If your LED TV is having power issues, the first thing you should check is the power supply. Make sure that the power cord is plugged into an outlet and that the TV is turned on. If the TV is still not powering on, you may need to replace the power supply.

To check the power supply, first unplug the TV from the power outlet. Next, locate the small panel on the back of the TV. There will be a cover over this panel, which you will need to remove. Once you have removed the cover, you will see a number of small circuit boards. One of these boards is the power supply.

In most cases, you can test the power supply by plugging it into a different outlet. If the TV powers on, then you know that the problem is with your original power outlet and not with the power supply itself. However, if the TV does not power on, then you will need to replace the power supply.

Check the connections

If your LED strip lights are not working properly, the first thing you should do is check the connections. Make sure that the power supply is properly connected to the TV and that the LED strips are firmly connected to the TV’s backlight connectors. If everything is properly connected, then it’s likely that your LED strips have failed and will need to be replaced.

Check the firmware

If you are having difficulty with your LED strip lights, you may need to check the firmware. Firmware is the software that runs your TV, and it can become outdated. Often, updates to firmware are available from Sony that will improve the performance of your TV.

Check the settings

When you first get your Sony Bravia TV, the LED lights on the strip may be set too dim or too bright for your liking. You can change this by going into the picture settings menu. Select “brightness” and then use the arrows to adjust the level of brightness. If this does not work, then you may need to replace the LED strips.

Check the environment

Before you start working on your TV, it’s important to check the environment. Make sure the area around your TV is clean and free of dust and debris. If there is any build-up on your TV, it could cause problems when you’re trying to repair it.

Next, take a look at the cords and connections. Make sure all of the cords are properly connected and that there are no loose wires. If you see any loose wires, try to reconnect them or replace them with new ones.

Once you’ve checked the environment and the connections, you can begin working on your TV.

Check the TV model

The first step is to determine if your Sony Bravia TV needs LED light strips. The model number is located on the back of the television. If your television is one of the following models, it will require LED light strips:
– KDL-40EX720
– KDL-46EX620
– KDL-52EX701

If you have a different model number, your TV does not require LED light strips and this article will not be helpful.

Check the warranty

Before you begin any type of repair, it’s important to check the warranty on your TV. voiding the warranty could result in having to pay for all repairs out-of-pocket, which could get expensive.

To check the warranty on your Sony Bravia TV, you will need to find the serial number. The serial number is usually located on a sticker on the back of the TV. Once you have the serial number, you can check the warranty by going to Sony’s website and entering the serial number into the “check warranty” function.

Scroll to Top