How to Install Led Strip Lights With Remote?

This blog will show you how to install led strip lights with remote in a few simple steps. You’ll be able to add some extra lighting to your home in no time!

Checkout this video:


If you want to add some special effects lighting to your home, car, or office, then installing LED strip lights with a remote is a great way to do it. LED ( Light Emitting Diodes) are very energy-efficient and tend to last a lot longer than traditional incandescent bulbs. And, by using a remote control, you can easily turn the lights on and off, change the color, or even create different lighting effects without having to get up and adjust anything manually.

What You Will Need

In order to install your LED strip lights with a remote, you will need the following items:
-LED strip lights
-Power supply
-Mounting tape or screws (optional)

1. Begin by measuring the length of your desired installation area.
2. Cut your LED strip lights to size, if necessary.
3. Connect the LED strips to the power supply and controller.
4. If desired, use mounting tape or screws to secure the LED strips in place.
5. Test your remote to ensure that it is working properly.

Step-By-Step Instructions

1.Start by finding a remote-friendly LED strip. Not all LED strips come with a remote, so you’ll need to purchase one that does. You can find these online or at your local hardware store. Make sure to get the right size for your needs – most strips come in 16.4ft (5m) or 33ft (10m) lengths.

2.Cut the LED strip to size, if necessary. If you’re using a long strip, you may want to cut it down to a manageable length before starting. Measure and mark the strip where you want to make your cut, then use scissors or a sharp knife to cut along the marked line.

3.Remove the adhesive backing from the LED strip and attach it to a clean, dry surface. Start at one end of the strip and peel back the adhesive backing until you reach the end of the strip (or wherever you plan on cutting it). Press the strip firmly into place on your chosen surface and continue until the entire strip is attached.

4.Connect the power supply and turn on your lights! Locate the power supply unit (usually marked with an “in” and an “out” arrow) and connect it to an outlet using the included adapter cord. Then, flip the switch on the power supply unit to turn on your lights!

Tips & Tricks

Installing LED strip lights is a great way to add lighting to any room. LED strip lights are available in a variety of colors and can be used for accent lighting or task lighting. They are also very easy to install, so you can do it yourself without having to hire an electrician.

Here are some tips and tricks for installing LED strip lights with a remote:

1. Read the instructions that come with your LED strip lights. This will give you an idea of what you need to do and what tools you need.

2. Choose a location for your LED strip lights. You will need to drill holes in the wall or ceiling to run the wires through. Make sure that the location you choose is close to an electrical outlet.

3. Use masking tape or painter’s tape to secure the wires in place while you work. This will keep them from falling behind the wall or ceiling and becoming difficult to reach.

4. Drill the holes for the wires using a drill bit that is slightly smaller than the diameter of the wire. This will make it easier to thread the wire through the hole.

5. Thread the wire through the holes and connect it to the power supply according to the instructions that came with your LED strip lights.

6. Install the remote control receiver according to the instructions that came with your LED strip lights. This receiver will allow you to control your LED strip lights with a remote control.

7. Test your LED strip lights by turning them on and off with the remote control. Make sure that they are working properly before you finish installation


In conclusion, installing LED strip lights with a remote is a relatively simple task that can be completed in a matter of minutes. By following the steps outlined in this article, you can ensure that your lights are installed correctly and will provide you with years of trouble-free operation.

Scroll to Top