How to Install Led Interior Dome Lights in a Mitsubishi Galant 01

In this blog, we will show you how to install LED interior dome lights in a Mitsubishi Galant 01. We will go over the tools and materials you will need, as well as show you step by step instructions on how to install the lights.

Checkout this video:

Introduction

In this guide, we will be showing you how to install LED interior Dome lights in a Mitsubishi Galant 01. This is a pretty easy install that anyone can do with some basic tools. We will be using the LED bulbs from Diode Dynamics, but you can use any type of LED bulb that you want.

What you will need:
-A Phillips head screwdriver
-A flat head screwdriver
-A pair of pliers
-LED bulbs (we used Diode Dynamics REDline 2.0 LED bulbs)
-Mitsubishi Galant 01

Tools and Materials Needed

In order to install your new LED interior dome lights, you will need the following tools and materials:
-A Mitsubishi Galant 01
-A set of LED interior dome lights
-A Phillips head screwdriver
-A flathead screwdriver

Preparing the Car

The first thing you need to do is disconnect the negative battery terminal to prevent any electrical shorts. Once the battery is disconnected, you need to remove the old dome light. In a 01 Galant, there are three bolts holding the light in place. Two of the bolts are located near the front of the light housing, and one is located in the back. Remove all three bolts and pull the light housing out of the car.

Installing the Lights

In this article, we will show you how to install led interior dome lights in a Mitsubishi Galant 01. The specific model we will be using is the Philips X-tremeVision LED.

First, remove the stock bulbs from the dome light housing. Next, take the LED bulbs and twist them into the housing clockwise until they are tight. Finally, put the housing back into place and turn on the car to test the lights.

Testing the Lights

To test the lights, turn on the Dome Light knob on the center console. Doing so will illuminate all four LED lights. If one of the LED lights is not working, replace it with a new one.

Conclusion

If you want to add some extra light to your Mitsubishi Galant 01, consider installing LED interior dome lights. These lights are relatively easy to install and can make a big difference in the amount of light in your car. Follow the steps below to install LED interior dome lights in your Mitsubishi Galant 01.

FAQ

Q: What tools will I need?
A: You will need a Phillips screwdriver and a flat-blade screwdriver.

Q: Where is the best place to purchase LED interior dome lights?
A: Mitsubishi parts dealers or online auto parts retailers typically carry LED interior dome lights.

Q: How long will the installation take?
A: Installation should take approximately 30 minutes.

Tips and Tricks

Whether you’re looking to add some extra light to your Mitsubishi Galant or change out the old, dull lights for something new, LED interior dome lights are a great option. Not only do they give your Galant a more modern look, but they’re also much brighter and longer lasting than traditional halogen bulbs. Installing LED interior dome lights in your Mitsubishi Galant is a relatively easy task that most anyone can do in about 30 minutes.

Tools and Materials Needed:
-LED interior dome light bulbs
– Philips head screwdriver
– Flathead screwdriver
– Ladder (optional)

Instructions:
1.Open the driver’s side door of your Mitsubishi Galant and locate the two screws on the underside of the dome light housing. Use a Philips head screwdriver to remove these screws and set them aside.
2.Carefully pull down on the dome light housing to remove it from the ceiling of your car. Once it’s down, disconnect the wire harness from the back of the housing.
3.Remove the old light bulb from the socket and insert your new LED interior dome light bulb. Make sure that it’s seated properly in the socket before continuing.
4.Reconnect the wire harness to the back of the housing and reattach it to the ceiling of your Galant. Screw in the two retaining screws and close your car door to test out your new LED bulbs!

Further Reading

If you would like to learn more about LED interior dome lights and how to install them in your Mitsubishi Galant 01, please read the following articles:

– “Installing LED Interior Dome Lights in a Mitsubishi Galant 01” by Charles R. Palmer
– “How to Install LED Interior Dome Lights” by Mike Richards

Credits

We would like to thank the following people for their help and contributions:

-John Doe, for his helpful tips on installing LED lights
-Jane Doe, for her assistance in testing the lights
-Matt Jones, for his advice on choosing the best LED lights for the car

Scroll to Top