How Do You Install Led Bed Lights on 2012 Nissan Frontier?

Looking to add some extra style and functionality to your truck? Installing LED bed lights is a great way to do it! In this post, we’ll show you how to install LED bed lights on a 2012 Nissan Frontier.

Checkout this video:


In this article, we will be discussing the installation of LED bed lights on a 2012 Nissan Frontier. This is a relatively simple process that can be completed in a few minutes with just a few tools.

Before we get started, there are a few things you’ll need to gather:
-A LED light kit (we recommend this one)
-A drill
-A screwdriver
-Wire cutters/strippers
-Electrical tape
-Zip ties (optional)
Now that you have everything you need, let’s get started!

What You Will Need

In order to install LED bed lights on your 2012 Nissan Frontier, you will need the following materials:
-LED bed lights
-1/8 inch drill bit
-Wire strippers
-Wire taps
-Electrical tape
-Zip ties

First, use the 1/8 inch drill bit to make pilot holes for the LED bed lights. Next, use the wire strippers to strip 1/2 inch of insulation off of the end of each wire. After that, use the wire taps to connect each wire to a corresponding wire on the Frontier’s taillight harness. Then, use the screwdriver to secure the LED bed lights in place. Finally, use the electrical tape and zip ties to secure all of the wires in place.

Preparing the Frontier for Installation

In order to install LED bed lights on your 2012 Nissan Frontier, you will need to take a few preparatory steps. First, remove any cargo or other items from the bed of the truck. Next, clean the area where you will be installing the lights to ensure that there is no dirt or debris that could interfere with the process. Finally, use a tape measure to determine where you would like the lights to be placed and mark those spots with a pencil.

Installing the LED Bed Lights

The LED bed lights on the 2012 Nissan Frontier are a great way to light up the bed of your truck for nighttime use. These lights are easy to install and provide a great source of light for loading and unloading your truck bed. Here is a step-by-step guide on how to install the LED bed lights on your 2012 Nissan Frontier.

1. Begin by opening the tailgate of your truck and locating the two mounting brackets for the LED bed lights. These brackets will be located on either side of the truck bed, near the bottom corner of the tailgate.

2. Next, take the LED bed light assemblies and line them up with the mounting brackets on the truck bed. Be sure that the LEDs are facing downward, towards the bed of the truck.

3. Once you have aligned the LED assemblies with the mounting brackets, use the supplied screws to secure them in place. Be sure to snug down each screw, but do not overtighten as this could strip the threads in the mount.

4. With both LED assemblies now mounted in place, go ahead and connect each one to its respective wiring harness. These harnesses will be located underneath the truck bed, near where you mounted the LEDs.


Finishing Up

Now that you have your LED bed lights installed, it’s time to finish up the job by testing them out and making sure they’re working properly. Once you’ve confirmed that everything is in working order, you can sit back and enjoy your new LED bed lighting!


In conclusion, installing LED bed lights on a 2012 Nissan Frontier is a relatively simple process. First, remove the old bulbs and then install the new ones in their place. Be sure to connect the positive and negative wires correctly so that the lights work properly. Finally, test the lights to make sure they are working correctly.


Q: How Do You Install Led Bed Lights on 2012 Nissan Frontier?

A: Please refer to your installation guide for specific instructions. However, in general, you will need to remove the old lights and bulb base from the bed of your truck. Once this is done, you can then install the new LED bed lights by connecting the wires to the corresponding wires on the truck. Make sure that all connections are secure before turning on your new lights.


To install LED bed lights on your 2012 Nissan Frontier, you’ll first need to purchase a LED light kit. You can find these kits at most auto parts stores or online. Once you have your LED light kit, follow the instructions below:

1. Park your Frontier in a well-lit area and make sure that the bed is empty.
2. Remove the two bolts that secure the truck’s taillight assemblies using a socket wrench.
3. Pull the taillight assemblies away from the truck and disconnect the wiring harnesses.
4. Install the LED light modules in the taillight assemblies in place of the factory bulbs.
5. Reconnect the wiring harnesses and reattach the taillight assemblies to the truck using the bolts you removed in Step 2.
6. Test the led lights to make sure they are functioning properly before driving your truck.


Before beginning any work on your car, it is important to read through the manual and familiarize yourself with the process. Make sure you have all the necessary tools and parts before beginning. Most importantly, always disconnect the battery before starting any work to avoid electrocution.

-LED bed lights
-Installation kit
-Nissan Frontier (2012 or newer)

1. LED bed lights are a great way to improve the look of your truck and make it easier to see in the dark.
2. Installation is simple and only takes a few minutes. You’ll need an LED bed light kit and a Nissan Frontier (2012 or newer).
3. Follow the instructions included with your kit to install the LED bed lights. Once they’re installed, you’ll be able to enjoy improved visibility and a great new look for your truck.

Scroll to Top